Time Setting - Acova PREMIUM BOX Instructions For Use Manual

2703593_rev1_Mise en page 1 17/07/2013 16:58 Page 44
To remove receiver associations (reset the receivers).
• Press button
The "TH" LED flashes and the association with
the transmitter is removed.
CF06 - Installation fault display
Installation fault
display
Turn the knob to exit the maintenance mode.

Time setting

Turn the knob to
The days begin to flash.
Press + or -- to make your choice,
OK to confirm it and go to
the next setting.
Perform the same procedure to
set the hours and minutes. Turn the knob to exit
the setting mode.
on the receiver for 1 minute.
Communication fault with
the energy manager
Communication fault with
the electronic counter
Communication fault with
the Typhone 2 PLC
.
- 43 -
Hours
Day
Minutes