Advertisement
Available languages
Available languages
b. Extension gun
Align correctly the extension gun with the gun. Push the extension inside the gun. Turn it
anticlockwise to lock it in place.
c. spray nozzle
-
Remove the installed accessory by pushing the PUSH button.
-
To install the spray nozzle, push it in the extension gun until it is locked in place.
-
To remove it, push the PUSH button.
Adjusting the nozzle
High pressure:
Trigger must be released; water must not come out of nozzle. Turn the rear part of the
nozzle counterclockwise Press the trigger, the water comes out at high pressure.
Low pressure:
Trigger must be released; water must not come out of nozzle. Turn the rear part of the
nozzle clockwise. Press the trigger, the water comes out at low pressure
brush
Align correctly the rotating brush with the gun. Push the brush inside the gun. Turn it
anticlockwise to lock it in place.
To remove the rotating brush, push the accessory rearward then turn it clockwise to
remove it.
11
d.
Rotating
Advertisement
