TP-Link TL-SG2216 Installation Manual page 7

English
Configuration
Configure the Switch Using the GUI
■
1. Set the IP address of your PC in the same subnet of the
switch. The IP address is 192.168.0.x("x" is any number
from 2 to 254); the Subnet Mask is 255.255.255.0.
2. Open a web browser and type the default management
address http://192.168.0.1 in the address field of the
browser, then press the Enter key.
3. Enter admin for the default User Name and Password,
both in lower case letters. Then click the Login button or
press the Enter key.
4. After a successful login, you can configure the switch on
the management page.
Configure the Switch Using the CLI
■
(Only for Smart Switches and Managed Switches)
You can log on to the switch and access the CLI to manage
the switch. For the detailed instructions as to how to do this,
please refer to the CLI Guide.
Configure the Switch Using the Utility
■
(Only for Easy Smart Switches)
You c an use t he Easy S mar t C o nf i gur at i o n Ut ilit y to
c ent r ally manage ent ire net wo r ks of t he Easy S mar t
5
English