Service; Fig.11 Data Plate - Igloo IBIZA User Manual

Table of Contents

Advertisement

Available languages

Available languages

(This concerns the "CAREL" thermostat) Thermostat displays E0 or E1 or L0 or HI or EE or Ed or DF instead
of temperature:
E0 – temperature sensors inside the chamber are damaged – call authorized service
E1 – failure of evaporator sensor - call authorized service
L0 – low temperature alarm (lower than temperature range set within the device – call authorized service
HI – high temperature alarm – call authorized service
EE – internal defect of the regulator – call authorized service
Ed – max. defrosting time exceeded
DF – defrosting in progress (this is not an alarm signal)
(This concerns the "IGLOO" thermostat) The device is working, sound signalling is activated...
Make sure that:
The condenser is clean, if necessary – clean the condenser
Condenser ventilator is working properly
Ambient temperature does not exceed 25ºC
The device is working too loud...– Make sure that:
The device is standing stably
Furniture adjoining the device do not vibrate when the compressor is working
Noises made by the operating device are a normal phenomenon. The devices are equipped with venti-
lators, engines and compressors, which turn on and off automatically Each compressor makes certain
noises when operating. These sounds are made by the aggregate engine and by cooling agent
fl owing through the circuit. This phenomenon constitutes a technical feature of cooling devices
and it does not signify their faulty work.
Steam precipitation on glasses of the device is a normal phenomenon in case of high relative air
humidity exceeding 60% and does not require calling the service!

6.2. SERVICE

IGLOO service telephone number: +48 (14) 662 19 56 or +48 605 606 071, e-mail: serwis@igloo.pl
If after checking points described in chapter 6.1 "Fault identifi cation and repair" the device still does not work pro-
perly, please contact Technical Service of the Igloo company, stating the data from the data plate Fig.11 (p.18)
18
User manual Ibiza
• Serial number (NS)
• Production date
• Type (name of the device)
and
• Date when the device was purchased
• Description of the problem
• Your exact address and telephone number
(with the code number)
The above fi gure shows a demonstrative data
plate and the data stated on the plate are
exemplary data, which are not related with
"Ibiza" device!
en
www.igloo.pl

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ibiza 0.9Ibiza 0.6

Table of Contents