Fig.8 Evaporator Pan; Fig.9 Cleaning The Condenser; Fig.10 Exchange Of The Fl Uorescent Lamp - Igloo IBIZA User Manual

Fig.8 Evaporator pan

1 – Evaporator sheet cover
2 – Evaporator drip pan
Do not use mechanical agents to fasten the defrosting process!
It is essential to keep the condenser of the device clean. Dirt may hinder the heat exchange, causing mainly increase in
electric energy consumption and may cause damage of aggregate compressor. In order to clean the condenser it is essential
to take out the wind brace Fig.9 (p.16) by unscrewing the metal screws at the bottom of the metal casing. Clean condenser
lamellas Fig.9/1 (p.16) with help of soft brush or paintbrush. If the condenser is extremely dirty (blocked lamellas) it is indica-
ted to use vacuum cleaner or compressed nitrogen to suck / blow the dirt from between lamellas.

Fig.9 Cleaning the condenser

1 – Condenser lamellas
The producer shall not be held responsible for damages of the condenser aggregate resulting
from non-observance of condenser cleanliness!
Fig.10 Exchange of the
fl uorescent lamp
1 – Grip of the fl uorescent lamp
2 – Fluorescent lamp
3 – Casing of the fl uorescent lamp
and the starter
4 – Starter of the fl uorescent lamp
16
User manual Ibiza
1
2
3 – Pan outlet pipe (it is necessary to check the paten-
cy and clean when blocked!)
4 – Water outlet funnel
4 3
3
4
1
1
en
2
www.igloo.pl