Advertisement
SA8 board supports 8-channel X.21 interface,SA8 board must be equipped with an 8
records at most X.21 DCE cable
▪ 12.5.3 Please input the quantity of V.24-DTE
SA8 board supports 8-channel V.24 interface,SA8 board must be equipped with an 8
records at most V.24 DTE cable
▪ 12.5.4 Please input the quantity of V.24-DCE
SA8 board supports 8-channel V.24 interface,SA8 board must be equipped with an 8
records at most V.24 DCE cable
▪ 12.5.5 Please input the quantity of V.35-DTE
SA8 board supports 8-channel V.35 interface,SA8 board must be equipped with an 8
records at most V.35 DTE cable
▪ 12.5.6 Please input the quantity of V.35-DCE
SA8 board supports 8-channel V.35 interface,SA8 board must be equipped with an 8
records at most V.35 DCE cable
o 12.6 Please input the quantity of MP8A board cable
MP8A board support SFP and RJ-45 interface,4 PCS fibre-Optical and 4PCS
120ohm 1*E1 cable can be configured at most for each MP8A.
13. ===Power Cable===
o 13.1 Need separate configure DC power cable or not
1.No need configure by default. The basic configuration includes a 3m power cable.
Need configure separately only when the length of power cable is not
enough.2.Usually, the device needs configure separate power cable only when it
needs connect to the PDF directly.
o 13.2 Please input the length of each device DC power cable (m)
By default, Huawei provides blue cables (-48V) and black cables (GND), and cables
of the other colors need to be remarked for purchase, and determine whether to
purchase locally according to the actual situation.
o 13.3 Select the type of C13 power cable
1.PDU:Power Distribution Unit, the special main jack for the rack.
2.If the main jack in the rack is C13SF(as shown in figure), please select ""C13 PDU""
in the option ""Select the type of C13 power cable"", otherwise select ""ordinarily
Advertisement
