Advertisement
8. ===Multiplexing & Demultiplexing Card===
o 8.1 8-Channel Multiplexing & Demultiplexing Card
1.This card does not need to configure Optical Transceiver.2.The port connected with
demultiplexing-port must configure CMDM Optical Transceiver.3.Multiplexing &
Demultiplexing Card contains 1-channel Multiplexing and 8-channel
Demultiplexing.Each channel need 2 PCS patch cords.
Multiplexing & Demultiplexing Card
9. ===10G/GE Auto-adaptation XFP SFP+ Optical Transceiver===
o 9.1 XFP SFP+ Transceiver-SFP+-1310nm-10G/1G-Single-mode-LC-10km
Only below boards surpporting 10GE/GE auto-sensing optical transceiver:
03031DJP 4-Port 10GBase LAN/WAN-SFP+ Physical Interface Card
03031DJQ 1-Port 10GBase LAN/WAN-SFP+ + 8-Port 100/1000Base-X-SFP Physical
Interface Card
03030WGQ 2-Port 10GBase LAN/WAN-SFP+ Physical Interface Card
10. ===155M SFP/eSFP Optical Transceiver===
o 10.1 Optical Transceiver,eSFP,1310nm,2.048Mb/s,LC,SM,2km
Need configure with MP8A board.
11. ===Patch Cord===
o 11.1 Please select the Client Interface Option of Patch Cord
Default LC,10m.If need other specification,Please change it at "Bill of Configuration".
o 11.2 Please input the quality of demultiplexing port of this equipment
1.This parameter is used for calculating the quantity of patch cords of demultiplexing-
port.Multiplexing & Demultiplexing Card contains 1-channel Multiplexing and 8-
channel Demultiplexing.Each channel need 2 PCS patch cords.
2.The port connected with demultiplexing-port must configure CMDM Optical
Transceiver.
8-Channel
Advertisement
