Advertisement
Interface Card(120ohm)
o 7.8 16-Port E1 Physical Interface Card(PIC,75ohm)
Need configure E1 Cable
Interface Card(75ohm)
o 7.9 4-Channel FXS/FXO+2-Channel E&M+2-Channel RS232+2-Channel
RS485 Board(MPA)
1. Two RS-485/RS-422 interfaces, based on the actual type of the peer device
prepare cables on site.
2. Two E&M interfaces, based on the actual type of the peer device prepare cables
on site.
3. Two RS-232 interfaces need to use a maximum of two RS-232 serial port cable.
4. 4-channel FXS/FXS interface need to use a maximum of four standard phone
lines.
o 7.10 8-Channel V.35/X.21/V.24 Board(SA8)
The board supports 8-channel RS-232/X.21/V.24/V.35 interface.
o 7.11 4 Channels C37.94 Optical Interface and 4 Channels CoDir64K
Electric Interface Board(MP8A)
You need to configure the SFP optical modules for Optical Interface and 120 ohm E1
cables for Electric Interface
o 7.12 4 Channels GE/FE PoE Electrical Interface Board
The calbes should be done on site.
16-Port E1 Physical
16-Port E1 Physical
Advertisement
