Preparation For Extraction Mode - Miele DA 1260 Operating And Installation Instructions

Installation
 Insert the hood.
 Tighten the two screws on the right
and left hand sides of the back of the
appliance. This will adjust the angle
and secure the ventilation hood.
 Refit the bulbs.
 Reinsert the grease filters.
34
Preparation for extraction
mode
 When using  6" (150 mm) exhaust
ducting, use a sharp knife to cut the
exhaust socket to size.
When using  5" (125 mm) exhaust
ducting, install the exhaust socket as
it is.
 Attach the exhaust ducting, e.g.,
flexible hose, to the exhaust socket
using a hose clip (available as an
optional accessory).
 Insert the vent collar into the exhaust
opening and secure it by turning it
slightly clockwise.