1. Manuals
  2. Brands
  3. Miele Manuals
  4. Ventilation Hood
  5. DA 1160
  6. Operating and installation instructions

Miele DA 1160 Operating And Installation Instructions

Hide thumbs Also See for DA 1160:
Table of Contents

Advertisement

Quick Links

Operating and Installation instructions
Rangehood
To avoid the risk of accidents or damage to the appliance, it is essential
to read these instructions before it is installed and used for the first time.
en - AU, NZ
M.-Nr. 09 712 770

Advertisement

Table of Contents
loading

Related Manuals for Miele DA 1160

Summary of Contents for Miele DA 1160

  • Page 1 Operating and Installation instructions Rangehood To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en - AU, NZ M.-Nr. 09 712 770...

  • Page 2: Table Of Contents

    Contents Caring for the environment ......... . 3 Warning and Safety instructions .

  • Page 3: Caring For The Environment

    Caring for the environment Disposal of the packing Disposal of your old appliance material or machine The transport and protective packing Electrical and electronic appliances / has been selected from materials which machines often contain materials are environmentally friendly for disposal which, if handled or disposed of and can normally be recycled.

  • Page 4: Warning And Safety Instructions

    Any other usage is not supported by children well away from the lamps at all the manufacturer and could be times. dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation of the appliance.

  • Page 5: Technical Safety

    Technical safety Installation, maintenance and repairs may only be carried out by a Before installation, check the Miele authorised person in accordance rangehood for visible signs of damage. with current national and local safety Under no circumstances should you regulations.
  • Page 6 Warning and Safety instructions Do not connect the appliance to the Using at the same time as other mains electricity supply by a heating appliances that depend on multi-socket unit or an extension lead. the air from the room These do not guarantee the required safety of the appliance (e.g.

  • Page 7: Correct Use

    Warning and Safety instructions There must be adequate ventilation of If the rangehood is being operated in the room when the rangehood is used recirculation mode, the above at the same time as appliances burning restrictions do not apply. gas or other fuels. Correct use In order to ensure safe operation, and to prevent gases given off by the...

  • Page 8: Correct Installation

    All ducting, pipework and fittings into the appliance and hindering its must be of non-flammable material. smooth operation. These can be obtained from Miele or The filters should be regularly from builders' merchants. cleaned or changed as appropriate. The appliance must not be Saturated filters are a fire hazard.

  • Page 9: Description Of The Functions

    Having a non-return flap fitted in the Charcoal filters can be ordered as an ducting ensures that air, once ducted accessory from Miele (see "Technical to the outside, cannot get back into the data"). room again.

  • Page 10: Operation

    Operation...

  • Page 11: Switching The Lighting On/Off

    Air outlet for air recirculation sufficient for normal cooking. j Rotary control for the cooktop ^ DA 1160, DA 1100: When frying or lighting (DA 1050-55, DA 1060) cooking food with a strong aroma, k Rotary control for the fan...

  • Page 12: Cleaning And Care

    To prevent immediate resoiling, the susceptible to scratches and Original Miele care product for stainless abrasions. Please observe the steel can be purchased from Miele or at following cleaning instructions. www.miele-shop.com (depending on country). Apply sparingly with a soft All external surfaces and controls can...

  • Page 13: Grease Filters

    Cleaning and care Grease filters Important for appliances with lacquered housing The re-usable metal grease filters in the appliance remove solid particles It is very difficult to clean this type of surface without causing minor marks to (grease, dust, etc.) from the kitchen the surface material.
  • Page 14 Ensure the spray arm is not obstructed. ^ Do not wash at more than 65 °C. If a Miele dishwasher is being used, select the Sensor wash programme. ^ Use a mild dishwasher detergent. Depending on the cleaning agent...

  • Page 15: Charcoal Filter

    ^ Unwrap the charcoal filter from its Charcoal filter packaging. If the rangehood is connected for recirculation (see "Installation"), a Miele NoSmell active charcoal filter must be inserted in addition to the grease filter. ^ Remove the grease filters. ^ Push the cover for the charcoal filter...

  • Page 16: Changing A Halogen Lamp

    Cleaning and care ^ Remove the grease filters. Changing a halogen lamp ^ Ensure the rangehood is disconnected from the electricity supply. To do this: – switch off at the wall socket and remove the plug, or – remove the mains fuse, or –...

  • Page 17: After Sales Service

    – your Miele Chartered Agent – Miele You will find the telephone number of Miele on the back cover of the manual. Please quote the model and serial number when contacting Miele. These are shown on the data plate which is visible when the grease filter is removed.

  • Page 18: Appliance Dimensions

    DA 1050-55 ... . B = 548 mm used to cover the building-in space left DA 1060, DA 1160 ..B = 598 mm by the previous rangehood. The spacer trim can be ordered as an accessory in DA 1100 .

  • Page 19: Safety Distance Between Cooktop And Rangehood

    Appliance dimensions Safety distance between cooktop and When deciding on the safety distance between the cooktop and rangehood, rangehood please note that a distance of 650 mm The minimum distances between above electric cooktops may be preferable to give more working space the top of a cooktop and the bottom of the rangehood are as follows, under the rangehood.

  • Page 20: Installation

    Installation Before installation, it is important to read the information given on the "Warning and Safety instructions" at the beginning of this booklet. This is particularly crucial when using the rangehood at the same time as a heating appliance that relies on oxygen from the same room, which could result in the build-up of toxic fumes.

  • Page 21: Installation Under A Wall Unit

    Installation Installation under a wall unit Several holes for fastening the rangehood under a wall unit are provided in the top of the housing. Use the fixing points indicated on the drilling template supplied with the appliance, and use only the screws designated for fixing to the wall unit.

  • Page 22: Fitting The Rangehood To The Wall

    Installation ^ For extraction mode, you must also Fitting the rangehood to the cut out a 170 mm diameter hole in wall the bottom of the wall unit. You also have the option of fitting the ^ If the mains connection cable is to be rangehood to the wall using two fed through the wall unit, a hole will mounting plates...
  • Page 23 Installation Remove the halogen lamps. To do this: ^ Slightly loosen the lamp's fastening screw. ^ Slide the screw and the lamp down. ^ Fix the mounting plates to the wall using the plugs and screws supplied. ^ Tighten the screw again. The screws and plugs are designed for use in solid walls only.
  • Page 24 Installation With air extraction mode: ^ Hang the rangehood on the mounting ^ When using exhaust ducting plates. C 150 mm, separate the exhaust socket at the tapered section with a sharp knife. For exhaust ducting C 125 mm, install the exhaust socket without modifications.
  • Page 25 Installation Before connecting the rangehood to the electricity supply, please read the "Electrical connection" and "Warning and Safety instructions" sections of this booklet. ^ Plug the connection cable into an electrical socket. ^ Carry out a functional test by turning on the fan.

  • Page 26: Electrical Connection

    Electrical connection If the switch is not accessible after All electrical work should be installation (depending on country), an undertaken by a suitably qualified additional means of disconnection must and competent person in strict be provided for all poles. accordance with current national For extra safety, it is advisable to install and local safety regulations.

  • Page 27: Connection For Air Extraction

    Connection for air extraction – When ducting is horizontal, it must Important: To avoid the danger of be laid to slope away at at least 1 cm toxic fumes, please observe the per metre to ensure no condensate Warning and Safety instructions. drains into the appliance.

  • Page 28: Condensate Trap

    Connection for air extraction Condensate trap Silencer (optional accessory) (optional accessory) In addition to insulating the exhaust ducting, we recommend that a suitable condensate trap is installed to collect and evaporate any condensate which may occur. Condensate traps are available for C 125 mm or C 150 mm ducting.

  • Page 29: Technical Data

    DA 1060....11.2 kg DA 1160....11.2 kg DA 1050-55.
  • Page 32 DA 1050-55 DA 1060 DA 1160 DA 1100 en - AU, NZ M.-Nr. 09 712 770 / 01...

Table of Contents