Installation
Insert the hood.
Tighten the two screws on the right
and left hand sides of the back of the
appliance. This will adjust the angle
and secure the ventilation hood.
Refit the bulbs.
Reinsert the grease filters.
34
Preparation for vented mode
When using 6" (150 mm) exhaust
ducting, use a sharp knife to cut the
exhaust socket to size with.
When using 5" (125 mm) exhaust
ducting, install the exhaust socket as
is.
Insert the non-return flap, if required.
Make sure the flap opens easily and
closes again by itself.