Related Manuals for Volkswagen VAS 6606/27
Summary of Contents for Volkswagen VAS 6606/27
- Page 1 Operating manual A d a p t e r c a b l e s e t V A S 6 6 0 6 / 2 7 32.VW.2210.3043_BA_V01_EN VAS 6606/27...
-
Page 2: Legal Notice
Symbols for warnings, prohibitions, mandatory actions and standards are taken from publicly Image sources accessible sources, such as the Internet. CAD product images and product photos are provided by the manufacturer. Images showing the product in use are provided with a reference to the source. 32.VW.2210.3043_BA_V01_EN VAS 6606/27... -
Page 3: Table Of Contents
Warning levels Important safety instructions Intended use Requirements for the target group Duties of the operator PRODUCT DESCRIPTION Scope of delivery Design VAS 6606/27-1 VAS 6606/27-2 Symbols and connections Wiring diagram VAS 6606/27-1 VAS 6606/27-2 Technical data VAS 6606/27-1 VAS 6606/27-2... -
Page 4: Introduction
With extensive experience in software and hardware development, CAR-connect is your dependable partner at every production stage, from prototyping to series production. CAR-connect GmbH – Experience, Expertise and Innovation – MADE IN GERMANY 32.VW.2210.3043_BA_V01_EN VAS 6606/27... -
Page 5: Safety
This operating manual is only valid for the following product: Item number 22103043 Designation Adapter cable set VAS 6606/27 Warning levels This chapter provides information about the warning levels used in this operating manual. DANGER Failure to observe the safety instructions WILL result in death or serious injury! -
Page 6: Important Safety Instructions
Defective and damaged products cannot guarantee protection against electrical voltage! • Do not let the product come into contact with chemicals! • Replace a defective or damaged product immediately! • Never attempt to repair or tamper with the product! 32.VW.2210.3043_BA_V01_EN VAS 6606/27... -
Page 7: Intended Use
The VAS 6606/27-1 adapter cable is used to connect the low-voltage plug directly to the MEB traction battery. The VAS 6606/27-2 adapter cable is used to connect the low-voltage plug to the port on the vehicle for the MEB traction battery. -
Page 8: Product Description
Immediately check the condition of the product and the completeness of the delivery. If anything is missing or defective, please contact the manufacturer immediately. (1) Adapter cable VAS 6606/27-1 (2) Adapter cable VAS 6606/27-2 (3) USB stick with operating manual 32.VW.2210.3043_BA_V01_EN... -
Page 9: Design
EN | Product description Design VAS 6606/27-1 Product design: (1) Low-voltage plug for MEB battery (2) Plug for isolator box 32.VW.2210.3043_BA_V01_EN VAS 6606/27... -
Page 10: Vas 6606/27-2
EN | Product description VAS 6606/27-2 Product design: (1) Low-voltage plug for the MEB traction battery port on the vehicle (2) Plug for isolator box Symbols and connections The following symbols are shown on the product: Symbol Meaning Observe the operating manual! The manufacturer part number is used in conjunction with the serial number to identify the product. -
Page 11: Wiring Diagram
EN | Product description Wiring diagram VAS 6606/27-1 32.VW.2210.3043_BA_V01_EN VAS 6606/27... -
Page 12: Vas 6606/27-1
EN | Product description VAS 6606/27-2 32.VW.2210.3043_BA_V01_EN VAS 6606/27... -
Page 13: Technical Data
EN | Product description Technical data VAS 6606/27-1 Rated data Values Manufacturer number 22102721 Maximum rated voltage Max. DC 60 V Maximum rated current Weight ~ 740 g Total length 2000 mm VAS 6606/27-2 Rated data Values Manufacturer number 22102740 Maximum rated voltage Max. -
Page 14: Operation
• Use the product only for the applications intended by the vehicle manufacturer! CAUTION Risk of damage! Plug connections lock into place when attached. • Unlock the plug connections before you detach them! (See chapter “Detaching the plug connections”) 32.VW.2210.3043_BA_V01_EN VAS 6606/27... -
Page 15: Startup
EN | Operation Startup VAS 6606/27-1 Observe the safety instructions. 2. Connect the plug to the disconnected socket of the traction battery you want to test. 3. Fold the locking mechanism up until it clicks into place. This pulls the plug into the plug connection. -
Page 16: Vas 6606/27-2
EN | Operation VAS 6606/27-2 Observe the safety instructions. 2. Connect the plug to the disconnected socket for the MEB traction battery on the vehicle. 3. Connect the plug for the isolator box to the appropriate slot on the VAS 6606 isolator box. -
Page 17: Detaching The Plug Connections
Pull out the lock button. Press down the latch and fold down the locking mechanism until it clicks into place. This releases the plug from the plug connection. Pull the plug connection apart. The plug connection is now detached. 32.VW.2210.3043_BA_V01_EN VAS 6606/27... -
Page 18: Cleaning
Observe the safety instructions! National and local requirements for regular testing must be observed! Test the product for proper function at intervals of no more than 24 months. Contact the manufacturer to have a professional function test performed. 32.VW.2210.3043_BA_V01_EN VAS 6606/27... -
Page 19: Help
Always include the serial number with any product queries. This number is found on the product. CAR-connect GmbH Am Egelingsberg 8 38542 Leiferde, Germany Phone: +49 (0) 5373 – 92197-0 Fax: +49 (0) 5373 – 92197-88 service@car-connect.cc www.car-connect.cc 32.VW.2210.3043_BA_V01_EN VAS 6606/27... - Page 20 Volkswagen Aktiengesellschaft K-GVO-LW Group After Sales – Group Service Literature and Systems Repair Shop Equipment PO box 011/4915 38442 Wolfsburg, Germany For internal use only Subject to technical changes Edition 03 / 2021 32.VW.2210.3043_BA_V01_EN VAS 6606/27...