Download Print this page

Installing Your Simcard; Signal Strength Test - G.S.M Activate GSM Auto Dialler Plus Manual

Control and monitoring from your mobile phone

Advertisement

New SIM cards will need registering before they can be used. Full details of how this is done
can normally be found in the SIM card pack. It will normally require that the SIM card is
inserted into a mobile phone, a number dialled and instructions followed. While the SIM is in
the mobile phone it would be a good time to disable call diverts, ring back and to disable
features such as voicemail and text alerts.
The Auto Dialler has a built in "sim active function" which keeps track of the unit's activity. If
there has been no usage for 6 weeks, it will send a text message to a preset recorded number
to keep the simcard active. This then eliminates the problems of sims being shut down if they
are unused for 3 months.
Activate and put credit on your simcard and disable voicemail using the following codes
Vodaphone:
T-Mobile:
Orange:
EE - send the text message command VM OFF to 150
ENSURE THE UNIT IS POWERED DOWN AND BATTERY TURNED OFF BEFORE
INSERTING THE SIMCARD.
1: Slide back the sim door and lift it up.
2: Slide the simcard in to the door making ensuring that the clipped corner of the simcard lines
up with the clipped corner of the simcard holder.
3: Close the sim door.
4: Slide the sim door to lock the simcard in place.
Connect 9 through to 24 volts DC to the input connector as per figure 1. Once power has been
applied (referring to figure 1) the
signal has been found the
for use.
Signal strength can be checked by sending the text command
The unit will reply back with a score from 1 - 30. Anything less than a score of 10 will make the
unit unreliable.
We recommend doing a signal strength on 2G , 3G and 4G (see diagram page 4) to see which
frequency is strongest
Note if using Giff Gaff simcards please disable balance notifications in your Giff Gaff
account

Installing your Simcard

call 1210
Tesco
call 222
O2
call 4502
Giff Gaff
blue
network LED light will flash once every second. Once a
green
LED will come on and stay on indicating the unit is now ready
Signal Strength
Page 5
call 2915
call 1760
call 1626
#status#

Advertisement

loading

This manual is also suitable for:

4gad+