Table of Contents
Advertisement
Bluetooth Function
(* not available for some models)
®
Bluetooth
is a wireless technology standard for
exchanging data over short distance between Bluetooth
devices. You can connect Bluetooth audio device,
mouse or keyboard via the TV.
1. Press
on the remote control to display the
homepage,
Press ▲/◄/► to select
Remotes & Accessories and press OK to enter.
2. Select Add accessory and press OK to enter.
The TV will search nearby Bluetooth devices
automatically.
3. Select an available device, press OK and follow the
guides on the screen to connect it.
Note: Bluetooth technology (if available in your TV) uses
2.4GHz frequency thus close proximity to Wi-Fi access
points, routers or microwave ovens might interfere with
Bluetooth audio streaming. If you face interruptions
in audio reception, you should restart your Bluetooth
device to find frequency with less interferences and if
you continue to face issues you should move closer
to TV or increase space between TV and source of
interferences.
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by TCL is under license. Other trademarks
and trade names are those of their respective owners.
Live TV Pause
(* not available for some models)
Allows you to pause, fast forward and rewind live TV,
so you don't have to miss any part of your favourite
programs. Before you use the function, connect a
USB drive to the TV first. For the first time, you should
complete the disk setup for the USB drive.
on the remote control and select Live TV
Press
Pause, then press OK/► to confirm. (Note: This option
is available only when Live TV Pause is set to on. Press
on the remote control, press ▲/▼ to select TV Set-
tings > Channels > Live TV Pause, press OK to toggle
on.)
1. Follow the directions on the screen to do the disk
setup if you use Live TV Pause for the first time.
2. After the disk setup is done, Live TV Pause will start,
and the Live TV Pause menu displays on the screen.
3. When the Live TV Pause menu disappears and
only the timing of the Live TV Pause remains on the
screen, you can press OK to call out the Live TV
Pause menu and operate according to the on-screen
prompt.
4. Press
button on the remote control to stop the Live
TV Pause and exit. (To access the buttons on the
Live TV Pause menu, you need to press
on the remote control to display the virtual remote
control keyboard first.)
Using more of your TV
Notes:
- Before you plug the USB drive to TV, make sure
you have backed up the data on the drive to avoid
unforeseen malfunction and data loss.
- We recommend that you use a USB drive with at
least 1GB free space and a disk speed faster than
5.0MB/sec.
- The bigger the USB drive free space for Live TV
(Settings)
>
Pause, the bigger the recording length.
PVR (Personal Video Recorder)
(* not available for some models)
Allows you to record your favourite TV programs. Before
you use the function, connect a USB drive to the TV first.
Note: The feature is available only in selected products
and, due to specific TV network limitations and country
technical requirements, might not be available in product
or place of installation. Feature might also be blocked
by TV network due to copyright protection (HD content,
recording protection). Please use
control to check if the feature is available in your product.
1. Press
2. Press OK/► to enter and select Record. It starts to
record automatically.
3. Press blue button to access Settings and use
▲/▼/◄/► to adjust the recording duration.
4. Press OK or
the recorded file will be saved. In normal
operation, the recording will stop automatically
when the recording duration expires.
Note: To access the blue button or , you need
to press
display the virtual remote control keyboard first.
5. In recording, the PVR mini pane will also show on
the screen to indicate the recording progress.
6. To watch the recorded program, exit PVR mode first.
Press
related record file. Press OK to play. (It is the same if
you record a digital radio program.)
Notes:
- This feature is available only for digital non encrypted
channels.
- Before you connect the USB drive to the TV, make
sure you have backed up the data in the drive
to avoid the loss of your important data due to
unforeseen malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source during
recording, store the recording data before changing
the channel or source.
- The TV cannot play files normally if the parameters of
button
the file exceed the limitations of the system, the file
format is not supported, the file is damaged, or the
file cannot be decoded.
13
on the remote
on the remote control and select PVR.
to stop recording manually,
button on the remote control to
and select PVR > PVR list, then select the
Hide quick links:
Advertisement
Table of Contents
