Table of Contents
Advertisement
user manual or the manufacturer of the problematic
devices should be consulted for further information.
Password in Parental Controls
- Set the password in the
Parental Controls menu.
- The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.
Using
Quick Start Function
It enables you to turn on your TV faster from standby
mode than turning this function off, but it will also
increase standby power consumption.
1. Press
on the remote control, select
> System > Power and energy > Quick start and
press OK/Right to enter.
2. Select the Quick start option and press OK to
toggle between on and off.
3. Press
to return to the previous menu.
Bluetooth Function
(* not available for some models)
Bluetooth
®
is a wireless technology standard for
exchanging data over short distance between Bluetooth
devices. You can connect Bluetooth audio device,
mouse or keyboard via the TV.
1. Press
on the remote control
>
Remotes & Accessories and press OK to enter.
2. Select Pair accessory and press OK to enter.
The TV will search nearby Bluetooth devices
automatically.
3. Select an available device, press OK and follow the
guides on the screen to connect it.
Note: Bluetooth technology (if available in your TV)
uses 2.4GHz frequency thus close proximity to Wi-
Fi access points, routers or microwave ovens might
interfere with Bluetooth audio streaming. If you face
interruptions in audio reception, you should restart
your Bluetooth device to find frequency with less
interferences and if you continue to face issues you
should move closer to TV or increase space between
(Settings) > System >
(Settings)
, select
(Settings)
Using More of Your TV
TV and source of interferences.
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by TTE Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
Blue Light Filter
It reduces the amount of blue light emitted by the
screen, which can reduce the visual fatigue associated
with screen viewing.
1. Press
on the remote control to display the
dashboard, select Picture > Advanced Settings >
Color and press OK/Right to enter.
2. Select the Blue Light Filter option, and press OK to
toggle between on or off.
Notes:
- After watching TV for half an hour, please move
away from the TV and rest your eyes.
- When resting, please look far away to adjust the
ciliary muscles of the eye to avoid eye strain.
- Please form a good habit of doing eye exercises
to protect eyesight and prevent myopia.
Reset Shop
Allows you to reset the TV to factory default settings.
1. Press
on the remote control, select
System > About > Reset and press OK to enter.
2. Press Up/Down to select Factory Reset and press
OK to enter. Then select Erase Everything and
press OK to confirm.
3. Enter the password you have set or the PIN
according to the on-screen prompt.
4. Select OK and press OK to confirm.
5. The Initial setup wizard appears. Follow the
instructions in the section Initial setup.
Multi Visual
Allows you to enjoy different programs with your family on
one TV at the same time.
The multi visual function is enabled by default. To use
the function, make sure your phone is Android OS and
the WiFi on the phone is turned on. Then follow the steps
below to operate.
1. Press
on the remote control, select
Network & Internet > Wi-Fi, and press OK to turn it
on.
2. To enter the feature, press
control,then select Multi Visual > Select your desired
display mode and press OK to enter. Press "Start
now" to connect.
3. Activate the cast screen function on your phone and
choose the TV's name you want to connect in the
searching list.
13
(Settings) >
(Settings) >
on the remote
Advertisement
Table of Contents
