Table of Contents
Advertisement
Chapter 4
Installing Channels
This section describes how to search and store
channels automatically. This may be done in either of
the cases below:
- you are prompted that there are no channels in TV
mode;
- you want to update your channels.
1. In TV mode, press
select Channels > Channel scan. Press OK/► to
enter.
2. The TV installs and arranges channels according
to your country or region. Press ▲/▼ to select
Country/Region, and press OK/► to enter. Enter
the default password 1234 or your own password in
case you have changed the password in the System
> Lock menu. Press ▲/▼ to select your country or
region and press OK to confirm.
3. Press ▲/▼ to select Scan Automatically and press
OK/► to enter.
4. Press ▲/▼ to select Channel Type and press ◄/►
to select Digital, Analogue or Digital&Analogue.
5. After configuration is completed, press ▼ to select
Search and press OK to start scanning channels.
6. The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you wish to hide or move channels,
press
on the remote control, select Channels >
Channel Organizer and press OK/► to enter.
Note: If the channel search retrieved only the analogue
channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty.
Manufacturers cannot be held responsible for lack of or
poor broadcasting in some areas.
Using Subtitles
You can enable subtitles for each TV channel. Subtitles
are broadcast via Teletext or DVB-T digital broadcasts.
With digital broadcasts, you have the additional option
of selecting a preferred subtitle language.
Note: Some options are available only when Subtitle is
set to on.
Turning On/Off Subtitles
1. Press
on the remote control, select Channels >
Subtitle and press OK/► to enter. You can also
press
on the remote control, select Subtitle to
enter.
2. Select the Subtitle option, and press OK to toggle
between on or off.
3. Press
to close the menu.
Enabling Subtitle Languages on Digital TV Channels
1. Press
on the remote control, select Channels >
Subtitle > Digital Subtitle Language 1st and press
OK/► to enter.
on the remote control and
Using more of your TV
2. Press ▲/▼ to select a subtitle language as your
preferred language and press OK to confirm.
3. Press ▲/▼ to select Digital Subtitle Language 2nd
and press OK/► to enter.
4. Press ▲/▼ to select a secondary subtitle language
and press OK to confirm.
5. Press
to close the menu.
Selecting a Subtitle Type on Digital TV Channels
1. Press
on the remote control, select Channels >
Subtitle > Subtitle Type and press OK/► to enter.
2. Press ▲/▼ to select a subtitle type and press OK to
confirm. You can select Hearing Impaired to display
the hearing impaired subtitles with your selected
language.
3. Press
to close the menu.
Using Teletext
Selecting Decoding Page Language
1. Press
on the remote control, select Channels >
Teletext > Decoding Page Language and press
OK/► to enter.
2. Press ▲/▼ to select a proper type of language in
which Teletext will display and press OK to confirm.
3. Press
to close the menu.
Digital Teletext Language
On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
Teletext pages in different languages. This function
allows you to select an available language as primary
language, which relates to different initial Teletext
pages.
1. Press
on the remote control, select Channels >
Teletext > Digital Teletext Language and press
OK/► to enter.
2. Press ▲/▼ to select a language and press OK to
confirm.
3. Press
to close the menu.
Network Wake Up
(* not available for some models)
This function allows you to turn on your TV from standby
mode via a network. To use this function, please make
sure:
1. Your TV is connected to an effective home network;
2. The desired controller, such as a smartphone, is
connected to the same network as your TV;
3. An app which supports network waking up function,
such as YouTube, has been installed into the
controller;
4. Networked standby is set to on in the Network &
Internet menu under homepage. Press
remote control,
select
Internet, use ▼ to select Networked standby and
11
n the
o
(Settings) > Network &
Hide quick links:
Advertisement
Table of Contents
