Table of Contents
Advertisement
user manual or the manufacturer of the problematic
devices should be consulted for further information.
Password in Parental Controls
- Set the password in the
Parental Controls menu.
- The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.
Using
Quick Start Function
It enables you to turn on your TV faster from standby
mode than turning this function off, but it will also
increase standby power consumption.
1. Press
on the remote control, select
> System > Power and energy > Quick start and
press OK/Right to enter.
2. Select the Quick start option and press OK to
toggle between on and off.
3. Press
to return to the previous menu.
Bluetooth Function
(* not available for some models)
Bluetooth
®
is a wireless technology standard for
exchanging data over short distance between Bluetooth
devices. You can connect Bluetooth audio device,
mouse or keyboard via the TV.
1. Press
on the remote control
>
Remotes & Accessories and press OK to enter.
2. Select Pair accessory and press OK to enter.
The TV will search nearby Bluetooth devices
automatically.
3. Select an available device, press OK and follow the
guides on the screen to connect it.
Note: Bluetooth technology (if available in your TV)
uses 2.4GHz frequency thus close proximity to Wi-
Fi access points, routers or microwave ovens might
interfere with Bluetooth audio streaming. If you face
interruptions in audio reception, you should restart
your Bluetooth device to find frequency with less
interferences and if you continue to face issues you
should move closer to TV or increase space between
(Settings) > System >
(Settings)
, select
(Settings)
Using More of Your TV
TV and source of interferences.
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by TTE Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
Reset Shop
Allows you to reset the TV to factory default settings.
1. Press
on the remote control, select
System > About > Reset > Factory Reset and
press OK to enter.
2. Select the Factory Reset option and press OK to
enter. Then select Erase Everything and
to confirm.
3. Enter the password you have set or the PIN
according to the on-screen prompt.
4. Select OK and press OK to confirm.
5. The Initial setup wizard appears. Follow the
instructions in the section Initial setup.
13
(Settings) >
press OK
Advertisement
Table of Contents
