Table of Contents
Advertisement
Make sure that the plug is disconnected
during the montage operations.
· Join the upper and lower sections of the flue
provisionally with an “a” screw (Fig. 11).
· Fix the upper section of the flue onto support
structure “b” (Fig. 11).
· Put locknuts onto the 4 bolts that are on the
upper part of the hood (Fig. 12).
· Hang the hood onto the support structure,
inserting the bolts with the above-mentioned
locknuts in the apertures above on the lower
side of the support structure. Turn the hood
until it stops at “a” (Fig. 13).
· Completely tighten nuts “b” (Fig. 13).
· Block the hood with a “c” screw (Fig. 13).
· Connect the evacuation tube to the hood. In
the case of using a non-return valve, check that
it functions correctly and is not blocked by the
tube.
· Insert the plug into the power supply socket.
· Remove the screw that joins the two external
sections of the flue.
· Slide the lower section of the flue downwards
and insert it into the apposite housing on the
upper part of the hood (Fig. 14)
Mounting the anti-fat filter
Position the filter at the back of the hood and
move the handle upwards until the filter is
blocked.
All manuals and user guides at all-guides.com
a
Fig. 11
Fig. 12
a
c
Fig. 13
Fig. 14
b
b
Advertisement
Table of Contents
