Advertisement
7. TROUBleSHOOTING
Problem
no LcD display
Incorrect measurements
Reduced or zero flow rate
Meter not recording flow
8. DeClARATION Of CONfORmITY
Declaration of Conformity
standards and directives
Digital flow meter
Model: tP101
2002/96/EEc WEEE Directive
93/68/EEc Marking Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
ImPORTANT: no liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INfORmATION: call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
Possible Cause
Bad battery connection
Batteries expired
Wrong K Factor
Flow rate below meter limits
turbine blocked
Faulty PCB
Faulty turbine
We, the sole importer into the UK, declare that the product listed below is in conformity with the following
Signed by Steve Buckle
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
the construction file for this product is held by the Manufacturer and may be inspected
on request by contacting Jack sealey Ltd.
Sole U.K. Distributor
Sealey Group
Bury St. Edmunds
suffolk.
Remedy
Check /Clean Battery terminals
Replace batteries
Refer to section 5 calibration
Increase flow rate
clean turbine
contact your sealey dealer
contact your sealey dealer
01284 757500
01284 703534
21st november 2008
www.sealey.co.uk
Web
sales@sealey.co.uk
tP101
Issue no: 1 - 21/11/08
Advertisement
