Page 1
Via Collection | 401446 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987. English pg 1-26 Français pg 27-31...
Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-26 Hammer Not actual size Français 27-31 Español 32-36 Skip the power trip. Safety 37-38 This time. Warranty Page 2 401446 www.sauder.com/services...
While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. RIGHT END (1) LEFT END (1) LARGE END (1) D2 TOP (1) BACK (1) www.sauder.com/services 401446 Page 3...
Look for this icon. It means a Step 1 video assembly tip is available at www.sauder.com/services/tips You have the choice of assembling this unit six ways: å 1. If attaching the 401446 Desk Return to the right or left side of the 401447 Executive å...
Page 6
Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. To begin assembly, push a SAUDER TWIST-LOCK® å FASTENER (F) into the large holes in the ENDS (A and B) and BACK (E).
Page 7
LEVELER BRACKETS (O) and ENDS (A and B). Now, turn a LEVELER (N) into each PROPEL NUT. NOTE: To raise a corner of the unit, turn the LEVELER counter-clockwise. å To lower a corner, turn the LEVELER clockwise. www.sauder.com/services 401446 Page 7...
Page 8
Finished edge Dowel end 401448 Right End ® How to use the SAUDER TWIST-LOCK FASTENER 1. Insert the dowel end of the FASTENER into the hole of the adjoining part. NOTE: The dowel end of the FASTENER must remain fully inserted in the hole of the adjoining part while locking the FASTENER.
Page 9
(2 used for the CORD MANAGERS) Edge with TWIST-LOCK® FASTENERS 401447 i t h ® f a c S u r - L O I S T E R S T E N F A S 401448 www.sauder.com/services 401446 Page 9...
Page 10
HEAD SCREWS (S) through the CONNECTOR PLATES and into the TOP. Go to the last step now. å BLACK 7/8" LARGE HEAD SCREW (16 used for the CONNECTOR PLATES) 401447 Desk Top 401448 Long fi nished edge Credenza Top Page 10 401446 www.sauder.com/services...
Page 11
Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. To begin assembly, push a SAUDER TWIST-LOCK® å FASTENER (F) into the large holes in the RIGHT END (A), LARGE END (C), and BACK (E).
Page 12
LEVELER BRACKETS (O) and ENDS (A and C). Now, turn a LEVELER (N) into each PROPEL NUT. NOTE: To raise a corner of the unit, turn the LEVELER counter-clockwise. å To lower a corner, turn the LEVELER clockwise. Page 12 401446 www.sauder.com/services...
Page 13
F A S Edge with TWIST-LOCK® FASTENERS Dowel end How to use the SAUDER TWIST-LOCK ® FASTENER 1. Insert the dowel end of the FASTENER into the hole of the adjoining part. NOTE: The dowel end of the FASTENER must remain fully inserted in the hole of the adjoining part while locking the FASTENER.
Page 14
Pull at the front and back edges, slowly working the FASTENERS out of the holes. Push the RIGHT END (A) onto the TWIST-LOCK® FASTENERS in å the 401447 Left End. Now, tighten four TWIST-LOCK® FASTENERS. 401447 Desk Top 401447 Left End Finished edge Dowel end Page 14 401446 www.sauder.com/services...
Page 15
Step 11 L-Shape Assembly Fasten the BACK (E) to the RIGHT END (A). Tighten four å TWIST-LOCK® FASTENERS. Edge with TWIST-LOCK® FASTENERS www.sauder.com/services 401446 Page 15...
Page 16
Step 12 U-Shape Assembly Fasten a CONNECTOR PLATE (H) to the 401447 Desk å Top. Use four BLACK 7/8" LARGE HEAD SCREWS (S). BLACK 7/8" LARGE HEAD SCREW (4 used in this step) 401447 Desk Top Page 16 401446 www.sauder.com/services...
Page 17
PLATE (H) and into the TOP. Fasten the TOP (D2) to the LARGE END (C) and BACK (E). å Tighten fi ve TWIST-LOCK® FASTENERS. BLACK 7/8" LARGE HEAD SCREW (4 used in this step) 401447 Desk Top Long fi nished edge www.sauder.com/services 401446 Page 17...
Page 18
This completes assembly. To clean your unit, dampen a cloth with tap water and wipe. å And to celebrate, why not share your success story? To cover unused screw holes 50 lbs. To cover TWIST-LOCK® FASTENERS Page 18 401446 www.sauder.com/services...
Page 19
Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. To begin assembly, push a SAUDER TWIST-LOCK® å FASTENER (F) into the large holes in the RIGHT END (A), LARGE END (C), and BACK (E).
Page 20
LEVELER BRACKETS (O) and ENDS (A and C). Now, turn a LEVELER (N) into each PROPEL NUT. NOTE: To raise a corner of the unit, turn the LEVELER counter-clockwise. å To lower a corner, turn the LEVELER clockwise. Page 20 401446 www.sauder.com/services...
Page 21
401448 Left End Finished edge Dowel end ® How to use the SAUDER TWIST-LOCK FASTENER 1. Insert the dowel end of the FASTENER into the hole of the adjoining part. NOTE: The dowel end of the FASTENER must remain fully inserted in the hole of the adjoining part while locking the FASTENER.
Page 22
(2 used for the CORD MANAGERS) Edge with TWIST-LOCK® FASTENERS Notch S u r f a c i t h o I S T - L O F A S T E N ® E R S Page 22 401446 www.sauder.com/services...
Page 23
Step 19 L-Shape Assembly Fasten the BACK (E) to the RIGHT END (A). Tighten four å TWIST-LOCK® FASTENERS. 401448 www.sauder.com/services 401446 Page 23...
Page 24
Step 20 U-Shape Assembly Fasten a CONNECTOR PLATE (H) to the 401448 Top. å Use four BLACK 7/8" LARGE HEAD SCREWS (S). BLACK 7/8" LARGE HEAD SCREW (4 used in this step) 401448 Top Page 24 401446 www.sauder.com/services...
Page 25
TOP. Fasten the TOP (D2) to the LARGE END (C) and BACK (E). å Tighten fi ve TWIST-LOCK® FASTENERS. BLACK 7/8" LARGE HEAD SCREW (4 used in this step) 401448 Top Long fi nished edge www.sauder.com/services 401446 Page 25...
Page 26
This completes assembly. To clean your unit, dampen a cloth with tap water and wipe. å And to celebrate, why not share your success story? To cover unused screw holes 50 lbs. To cover TWIST-LOCK® FASTENERS Page 26 401446 www.sauder.com/services...
élément et conserver le livret pour future référence. EXTRÉMITÉ DROITE ..........1 FIXATION TWIST-LOCK® ........19 Pour contacter Sauder EXTRÉMITÉ GAUCHE ..........1 COUVERCLE DE FIXATION TWIST-LOCK® ..19 en ce qui concerne cet GRANDE EXTRÉMITÉ ..........1 PLAQUE DE CONNECTEUR .......2 élément, faire référence...
Page 28
FIXATION. Pour commencer l'assemblage, enfoncer une FIXATION 2. Bien serrer la FIXATION à l'aide d'un tournevis Phillips. TWIST-LOCK® SAUDER (F) dans les gros trous des EXTRÉMITÉS (A et B) et de l'ARRIÈRE (E). ÉTAPE 5 REMARQUE : La GRANDE EXTRÉMITÉ (C) n’est pas utilisée dans l’...
Page 29
Fixer la GRANDE EXTRÉMITÉ (C) à l’ARRIÈRE (E). Serrer quatre Pour commencer l'assemblage, enfoncer une FIXATION FIXATIONS TWIST-LOCK®. TWIST-LOCK® SAUDER (F) dans les gros trous de l'EXTRÉMITÉ DROITE (A), de la GRANDE EXTRÉMITÉ (C) et de l'ARRIÈRE (E). Fixer deux GESTIONNAIRES DE CORDON (P) à l'ARRIÈRE (E).
Page 30
éviter d'endommager l'élément ou le sol. ÉTAPE 12 Pour commencer l'assemblage, enfoncer une FIXATION TWIST-LOCK® SAUDER (F) dans les gros trous de l'EXTRÉMITÉ Fixer une PLAQUE DE CONNECTEUR (H) au Dessus de Bureau DROITE (A), de la GRANDE EXTRÉMITÉ (C) et de l'ARRIÈRE (E).
Page 31
REMARQUE : Prière de lire les informations importantes sur la sécurité fi gurant sur les pages arrière du manuel d’instructions. Ceci complète l'assemblage. Pour nettoyer l’unité, humidifi er un chiff on avec de l’eau du robinet et essuyer. www.sauder.com/services 401446 Page 31...
EXTREMO DERECHO ..........1 SUJETADOR TWIST-LOCK® ......19 et conserver le livret pour future référence. EXTREMO IZQUIERDO ..........1 CUBIERTA DE SUJETADOR TWIST-LOCK® ..19 Pour contacter Sauder EXTREMO GRANDE ...........1 PLACA DE CONECTOR .........2 en ce qui concerne cet PANEL SUPERIOR ............1 MEDIO-OJAL ..............1 élément, faire référence...
Page 33
Para comenzar el ensamblaje, empuje un SUJETADOR cuando se enclava el SUJETADOR. TWIST-LOCK® SAUDER (F) dentro de los agujeros grandes de los EXTREMOS (A y B) y del DORSO (E). 2. Apriete el SUJETADOR lo más apretado posible con un destornillador Phillips (cruz).
Page 34
Fije el EXTREMO GRANDE (C) al DORSO (E). Apriete cuatro Para comenzar el ensamblaje, empuje un SUJETADOR TWIST-LOCK® SUJETADORES TWIST-LOCK®. SAUDER (F) dentro de los agujeros grandes del EXTREMO DERECHO (A), del EXTREMO GRANDE (C) y del DORSO (E). Fije dos ORGANIZADORES DE CABLES (P) al DORSO (E). Use dos TORNILLOS NEGROS DE CABEZA GRANDE de 14 mm (T).
Page 35
PASO 12 Para comenzar el ensamblaje, empuje un SUJETADOR TWIST-LOCK® SAUDER (F) dentro de los agujeros grandes del EXTREMO Fije una PLACA DE CONEXIÓN (H) al Panel Superior de Escritorio DERECHO (A), del EXTREMO GRANDE (C) y del DORSO (E).
Page 36
NOTA: Por favor, lea las páginas de atrás del folleto de instrucciones en cuanto a importante información de seguridad. Esto completa el ensamblaje. Para limpiar la unidad, humedezca un paño con agua de llave y limpie. Page 36 401446 www.sauder.com/services...
à Les téléviseurs peuvent être particulièrement un téléviseur. cet eff et. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. www.sauder.com/services 401446 Page 37...
Page 38
Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 38 401446 www.sauder.com/services...
à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
Page 40
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.