HIKVISION Pro Series Quick Start Manual page 3

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Conformité Industrie Canada ICES-003
Ce dispositif répond aux exigences des normes CAN ICES-3 (A)/NMB-3(A).
Safety Instructions
● Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
● Firmly connect the plug to the power socket. Do not connect several devices to one power
adapter. Power off the device before connecting and disconnecting accessories and peripherals.
● Shock hazard! Disconnect all power sources before maintenance.
● The equipment must be connected to an earthed mains socket-outlet.
● The socket-outlet shall be installed near the equipment and shall be easily accessible.
● indicates hazardous live and the external wiring connected to the terminals requires
installation by an instructed person.
● Never place the equipment in an unstable location. The equipment may fall, causing serious
personal injury or death.
● Input voltage should meet the SELV (Safety Extra Low Voltage) and the LPS (Limited Power Source)
according to the IEC60950-1.
● High touch current! Connect to earth before connecting to the power supply.
● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
● Use the device in conjunction with an UPS, and use factory recommended HDD if possible.
● This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death.
● This equipment is not suitable for use in locations where children are likely to be present.
● CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
● Improper replacement of the battery with an incorrect type may defeat a safeguard (for example,
in the case of some lithium battery types).
● Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery,
which may result in an explosion.
● Do not leave the battery in an extremely high temperature surrounding environment, which may
result in an explosion or the leakage of flammable liquid or gas.
● Do not subject the battery to extremely low air pressure, which may result in an explosion or the
leakage of flammable liquid or gas.
● Dispose of used batteries according to the instructions
● Keep body parts away from fan blades and motors. Disconnect the power source during servicing.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
● The device is designed for indoor use only. Install it in a well-ventilated, dust-free environment
without liquids.
● Ensure recorder is properly secured to a rack or shelf. Major shocks or jolts to the recorder as a
result of dropping it may cause damage to the sensitive electronics within the recorder.
● The equipment shall not be exposed to dripping or splashing and that no objects filled with liquids
shall be placed on the equipment, such as vases.
● No naked flame sources, such as lighted candles, should be placed on the equipment.
● The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc. The openings shall never be blocked by placing the
equipment on a bed, sofa, rug or other similar surface.
● For certain models, ensure correct wiring of the terminals for connection to an AC mains supply.
2