Advertisement
Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363. If the plug
has to be removed, it should be cut off and carefully disposed of
immediately. To avoid a possible shock hazard, do not insert the
discarded plug into a mains socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains lead must
be connected as shown below. The wires in the mains lead fitted to this
appliance are coloured in accordance with the following code:
Connect Blue to
Neutral (N)
•
The Blue wire must be connected to the terminal marked N or
coloured Black.
•
The Brown wire must be connected to the terminal marked L or
coloured Red.
•
Check that there are no cut or stray strands of wire inside the plug.
•
Use a 13 Amp BS 1362 fuse, only use BSI or ASTA approved fuses.
•
If you are in any way unsure which plug or fuse to use, always refer to
a qualified electrician.
•
After replacing or changing a fuse on a moulded plug, the cover must
be refitted to the plug; the appliance must not be used without a fuse
cover.
Technical data
Model
Voltage
Rated power
Protection class
Hurricane CAT3 Carpet Washer
FLR00054
User Manual
Connect Brown to
Live (L)
Ensure the outer sheath of the mains lead
is securely held by the cable clamp
FLR00054
220-240V AC 50Hz
1000W
II
Advertisement
