Advertisement
Before initial use
Note: A pozidrive screwdriver (not supplied) is needed for assembly.
Check all parts are present and have not been damaged in transit.
If any parts are missing or damaged contact:
help@daewooelectricals.com
Fit the clean water tank by tilting it
forward and locating on the main
body of the Carpet Washer then
push the top back until it locates
and locks with the lugs onto the
secured handle.
The dirty water tank comes pre-fitted to the main body of the Carpet
Washer.
Position the handle in place on the main
body of the Carpet Washer and secure
in place using the two screws supplied.
Hurricane CAT3 Carpet Washer
FLR00054
User Manual
Advertisement
