Table of Contents
Advertisement
Remove Red-Eye
The machine detects eyes in your photos and
will remove red-eye from your photo.
Note
There are some cases when red-eye may
not be removed.
• When the face is too small in the
image.
• When the face is turning too far up,
down, left or right.
a
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press
(PhotoCapture).
b
Press a or b to choose
Photo Effects.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Remove Red-Eye.
Press OK.
When Remove Red-Eye is
successful, the photo after effect is
shown. The adjusted part is shown in
a red frame.
When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Note
Press a to try Remove Red-Eye again.
e
Press OK and + or - repeatedly to enter
the number of copies you want.
f
Do one of the following.
Press OK and change the print
settings. (See page 41.)
If you do not want to change any
settings, press Colour Start to print.
Printing photos from a memory card or USB Flash memory drive
Monochrome
5
You can convert your photo to monochrome.
a
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press
b
Press a or b to choose
Photo Effects.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Monochrome.
Press OK.
e
Press OK and + or - repeatedly to enter
the number of copies you want.
f
Do one of the following.
(PhotoCapture).
Press OK and change the print
settings. (See page 41.)
If you do not want to change any
settings, press Colour Start to print.
5
5
37
Advertisement
Table of Contents
