Define Byte - ADF Web HD67E09-A1 User Manual

Industrial Electronic Devices

DEFINE BYTE:

By pressing the "Define Byte" button from the main window for SW67E09 (Fig. 2) the window "Define Offset" appears (Fig. 6).
In the field "Select the Slave DeviceNet" it is possible to select the slave to configure between those defined in the "DeviceNet Network"
step.
The data of the column have the following meanings:
Byte IN side:
In the column "Offset" it is possible to select the
desired byte of DeviceNet which will be written
from the EtherCAT Master;
In the column "Mnemonic" is possible to insert a
description. It isn't necessary compiling this field,
is only a label.
Byte OUT side:
In the column "Offset" it is possible to select the
desired byte of DeviceNet which will be read from
the EtherCAT Master;
In the column "Mnemonic" is possible to insert a
description. It isn't necessary compiling this field,
is only a label.
ADFweb.com S.r.l.
User Manual EtherCAT Slave / DeviceNet Master
Document code: MN67E09_ENG
Figure 6: "Define Offset" window
Revision 1.000 Page 20 of 26