Table of Contents
Advertisement
9.3.2.
Set up PC-EVR adjustment program
1. Turn on the PC and install the PC-EVR Adjustment
Program into the PC.
2. Execute the "kdr2006.exe" file by double clicking to start up
the PC-EVR adjustment program.
The main menu will be displayed.
3. Select the desired model.
4. Turn on the camcorder. Then, click "Start".
Fig. E3-1
5. The communication is complete, and the dialog will appear.
Then, click "Cam" or "Arm" to save the EEPROM data.
Fig. E3-2
6. Saving for EEPROM data is complete, menu will appear.
To perform each adjustment, display the adjustment menu
by selecting the desired menu from "Camera Adjust" or
"Video Adjust" and select each adjustment item.
Fig. E3-3
VDR-D300EG / VDR-D300E / VDR-D300EB / VDR-D300EP / VDR-D300EE / VDR-D300GC / VDR-D300GN / VDR-D300SG / VDR-D300GCS / VDR-D308GK
Note:
The adjustment data is stored to the EEPROM IC after
each adjustment.
7. After adjustment, to end the software, select "Exit" in File
menu or close the window.
8. To release the PC connection (COM) mode, push the
[DELETE] button, [RECORDING START/STOP] button and
[JOYSTICK CONTROL UP] simultaneously for 3 seconds
without connecting the USB Cable.
45
Fig. E3-4
Advertisement
Table of Contents
