Initial Operation - IDEA VISION C3 VacuMount Instruction Manual

Initial Operation

1
pic
vacuum hose into
vacuum pump
2
3. Check that the suction cups and the mounting
surface are clean.
To guarantee a proper adhesion of the suction cup it
is most important to make sure that the surfaces of
both, the suction cup and the mounting surface are
clean, dry and dust free.
4
contact@idea-vision.de
1. Connect vacuum hose with the Micro-controlled Vacuum
pump and C3, C1 structure.
Push the hose into the connections.
You can feel a distinct resistance during this process.
If there is a leak, the VacuMount system will not hold or the
vacuum pump will always pump.
2. Connect the Micro-controlled Vacuum pump system
with the power supply (11V – 30V).
3
4. Check the stability of the mounting surface.
Hoods, doors of modern cars are often weak.
Place the suction cups near edges, beadings,
seams, etc.
Keep in mind to find suitable mounting spots for
safety/tension belts.
5