Table of Contents
Advertisement
Assembling
1. Make sure all components are available
and in working order.
2
3. Safety: Although the C3 VacuMount ́ s holding
force is adequate for regular driving shots,
tension belts must be used for additional safety.
In any case, especially if mounted on cars or
overhead, the object attached to the
C3 VacuMount (e.g. camera) has to be secured
additionally with a safety cable or a tensioning
strap.
Use pads to avoid dents and scratches on
carpaint. Tighten tension belts carefully to avoid
damages on the car.
Note: Tension belts give additional safty and
avoid vibrations, especially on thin metal
sheets.
4
contact@idea-vision.de
1
2. Clean car surface and suction cups.
Note: Clean, dry, dust free
3
4. Place C3 VacuMount where you want
to shoot.
7
Advertisement
Table of Contents
