IDEA VISION C3 VacuMount Instruction Manual page 8

5. Open articulated links to level suction
cups to surface.
6
7. Adjust the C3 to your requirements. Close
articulated links after all suction cups got vacuum.
8
8
5
6. Press firmly suction cups down and push green
Button AUTO at the Micro-controlled Vacuum
pump or push green Button at the C3 structure.
The vacuum pump starts working for appr. 3 sec
Note: Assure that the Vacuum Pump System is
in Mode Automatic
7
8. Mount camera direct to C3 structure using
M8, 1/4" ,3/8 ́ ́ or use a wedge/tilt plate.
www.idea-vision.de