Step 1; Step 2 - modway EEI –2046 Quick Start Manual

EEI –2046
ROOM DIVIDER

STEP 1:

Please put the Top Panel (1) upside down on a carpeted or padded surface.
Attach one piece of Divide Frame (5) into the bottom of Top Panel (1) by using 2 piece of Bolt (C) and 2 pieces of
Flat Washers (D) as shown.
Use Allen Wrench (G) to tighten the Bolts (C) clockwise until secure.
Insert 2 pieces of Long Bolt (A) into the bottom of Top Panel (A) by hand as shown.
A
Ax2 Cx2

STEP 2:

Place 1 piece of Side Panel (3) to the bottom of Top Panel (1) through the 2 pieces of Long Bolt (A) as shown.
Attach 1 piece of Shelf (2) upside down to the Side Panel (3) and Divide Frame (5) by using 2 pieces of Nut (E) with
2 piece of Flat Washer (D) and 2 pieces of Bolt (C) with 2 pieces of Flat Washer (D) as shown.
Use Wrench (F) to tighten the Nuts (E) and Allen Wrench (G) to tighten the Bolts (C) clockwise until secure as shown.
F
E
D
2
3
Cx2 Dx4
Customer Service 908-368-1025︱ ︱ ︱ ︱ www.modwayfurniture.com
A
Dx2 Gx1
3
Ex2 Fx1
G
5
D
C
C
5
1
G
C
D
2
1
Gx1
Hardware & Tool required
C
D
5
Hardware & Tool required
Page 2 of 2