modway EEI-2084 Quick Start Manual

Casual chair

EEI-2084

CASUAL CHAIR

Thank you for purchasing the MODWAY CASUAL CHAIR！

Before you start, here is some helpful advice:

1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step

instructions.

2.Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approx assembly time: 30 minutes.

3.Please do not use any tools other than those provided or recommended in these instructions.

4.Please do not throw away any of the packaging or the instruction until you have checked all the components and

hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

environmentally friendly way.

5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save the tools that has been provided.

6.Please keep all fitting out of reach of children.

Right Leg

Chair Seat

Customer Service 908-368-1025︱www.modwayfurniture.com

Bolt M8x20mm

Allen Wrench M5

Left Leg

Chair Back

Page 1 of 2

Table of Contents

Need help?

Do you have a question about the EEI-2084 and is the answer not in the manual?

Page 1 EEI-2084 CASUAL CHAIR Thank you for purchasing the MODWAY CASUAL CHAIR！ Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions. 2.Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
Page 2 EEI-2084 CASUAL CHAIR STEP 1: Please put Right Leg (A) side down on a carpeted or padded area. Attach on side of Chair Seat (C) to Right Leg (A) by using 4 pieces of Bolt (1) as shown. Use Allen Wrench (2) to tighten Bolts (1), please do not fully tighten Bolts (1) at this step.
Page 3 EEI-2084 CASUAL CHAIR STEP 3: Two People are recommended for this step. Carefully turn over the assembled Legs (A&B) and Chair Seat (C). Attach Chair Back to Legs (A&B) by using 4 pieces of Bolt (1) as shown. Use Allen Wrench (2) to tighten Bolts (1) and the Bolts (1) at step 1 and step 2 clockwise until secure.