World Time
World Time lets you look up the current time
in any one of 48 cities around the globe, and
UTC (Coordinated Universal Time).
Checking World Time
1.
Enter the World Time Mode.
Navigating Between Modes
l
After the currently selected World Time
City name appears, the watch will display
the current time in that city.
While in World Time Mode, you can
●
display the World Time City by pressing
(A).
World Time City
World Time
Watch Operation Guide 5674
World Time City Setting
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
1.
Enter the World Time Mode.
Navigating Between Modes
l
2.
Use (B) and (D) to display the city you want
to specify as a World Time City.
Holding down (B) or (D) scrolls through
●
settings at high speed.
3.
To change the summer time setting, hold
down (A) for at least two seconds.
Each time you hold down (A) for at least
●
two seconds, the setting will toggle
between summer time and standard
time.
[DST] appears whenever the display
●
current time is summer time.
4.
Press (A) to exit the setting screen.
Note
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
While [UTC] is selected as the city, you
●
will not be able to change or check the
summer time setting.
The summer time setting you configure
●
is applied to the currently selected city
only. It does not affect other cities.
Swapping Your Home Time
and World Time
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (B) for at least three seconds.
This causes [SWAP] to flash on the
display. Next, your Home City Time and
World Time will swap with each other.
Example: To swap your Home City
(TYO:TOKYO) and World Time City
(NYC:NEW YORK)
Before swapping
After swapping
TYO time
NYC time
TYO information
NYC information
10