Related Manuals for Boston Acoustics PowerVent PV400
Summary of Contents for Boston Acoustics PowerVent PV400
- Page 1 PV 4/6/8 MANUAL 7.1.99 ƒ 7/30/99 4:01 PM Page 1 PV400 PV600 PV800 PowerVent Powered Subwoofers ®...
-
Page 2: Important Safety Instructions
PV 4/6/8 MANUAL 7.1.99 ƒ 7/30/99 Important Safety Instructions WARNING: To reduce the risk of fire or electric shock, do not expose this CAUTION RISK OF ELECTRIC SHOCK product to rain or moisture. DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”... -
Page 3: Regulatory Compliance Statements
Boston Acoustics, Inc. 300 Jubilee Drive Peabody, MA 01960 U.S.A. declare under sole responsibility that the product PV400, PV600, PV800 to which this declaration relates, is in conformity with the following standards or other normative documents: auf das sich diese Erklärung bezieht, mit der/den folgenden Norm(en) oder Richtlinie(n) übereinstimmt: auquel se réfère... - Page 4 PV 4/6/8 MANUAL 7.1.99 ƒ 7/30/99 volende noem(en) of richtlijn(en) beantwo- ordt: a cui si riferisce questa dichiarazione è conforme alla/e sehuente/i norma/o docu- mento/i normativo/i: European Users: This equipment has been tested and found to comply with the following European directive: (i) EMC Directive 89/336/EEC amending directive 92/31/EEC 93/68 EEC as per EN 50081-1: 1992 according to...
-
Page 5: Specifications
1 /8 x 19" x 11 x 16 " (420 x 302 x 410mm) 30 lbs (14kg) Black ash vinyl veneer PV400 44–150Hz 65 watts continuous, 4 <0.5% THD, 50 watts, 20–150Hz 75–150Hz 24dB/octave low-pass 7" (180mm) DCD internal Bandpass 1 /2 x 10 x 11"... - Page 6 Use an RCA cable (not included), as shown, to connect your digital receiver’s subwoofer output to the subwoofer. Use the bypass crossover control input. On the PV400, set the crossover to the direct position and connect to line level in.
- Page 7 PV 4/6/8 MANUAL 7.1.99 ƒ 7/30/99 4:01 PM Page 7 If you do not wish to run RCA cables to your subwoofer, you may use speaker wire to connect the subwoofer in parallel with your main speakers. The subwoofer does not present any addi- tional load to your receiver.
- Page 8 PV 4/6/8 MANUAL 7.1.99 ƒ 7/30/99 Connecting Your Subwoofer to Stereo or Dolby Pro Logic ® Systems For stereo or Dolby Pro Logic systems, the easiest method is to use speaker wire connections as shown. You may also use the “sub out” connection from your receiver to the input on the subwoofer marked use crossover control.
- Page 9 Set to on, and the PV800 will stay on all the time. The PV600 and PV400 have auto-on circuitry that turns the subwoofer on when a signal is presented, and turns off if no signal is detected for 15 minutes.
- Page 10 PV 4/6/8 MANUAL 7.1.99 ƒ 7/30/99 Placement Place the subwoofer next to a wall or in a corner near your main speakers. Typically, the sound is best when the subwoofer is within 15 feet (5m) of the main speakers. However, the sharp 24dB/octave crossover roll-off permits placement farther from the main speakers if necessary.
-
Page 11: Limited Warranty
Page 11 Limited Warranty For one year from the date of purchase, Boston Acoustics will repair for the original owner any defect in materials or workmanship that occurs in normal use of the subwoofer, without charge for parts and labor. - Page 12 4:01 PM Page 12 BassTrac and DCD (Deep Channel Design) are trademarks and PowerVent, Boston, and Boston Acoustics are registered trademarks of Boston Acoustics, Inc. © 1999 Boston Acoustics, Inc. All rights reserved. Specifications subject to change without notice. 042-001004-0...