Advertisement
Installing the Kit
1. Install the 2 engine-mount bolts (3/8 x 1 inch)
and torque them to 46 N∙m (34 ft-lb); refer to
Figure
5.
1. Engine-mount bolts
2. Install the upper belt cover provided in this kit
with the bolts previously removed.
1. Upper belt cover
Figure 5
Figure 6
2. Upper belt-cover bolts
3. Install the blade drive and route the belt around
it as shown in
1. Belt
g213164
4. Install the lower belt cover by threading 2 bolts
(1/4 x 1.33 inches) through the lower belt cover,
through the holes drilled (if applicable), and into
the upper belt cover.
1. Lower belt cover
g213165
3
Figure
7.
Figure 7
2. Blade drive
Figure 8
2. Lower belt-cover bolts
g207687
g212486
Advertisement
