Advertisement
Figure 2
1. Belt
7. Remove and discard the metal belt guide and 2
corresponding bolts
Figure 3
1. Metal belt guide (discard)
8. Remove and discard the front belt cover; retain
the corresponding bolts
2. Blade drive
(Figure
3).
2. Belt-guide bolts (discard)
(Figure
4).
g207687
Model 20339 shown; appearance of machine varies
1. Upper belt cover (discard)
9. If needed, center punch and then use a
g212112
9/32-inch drill bit to drill 2 holes through the deck
for installation of the belt covers.
Note:
Use the template at the back of these
instructions for the appropriate hole orientation.
2
Figure 4
2. Upper belt-cover bolts
(retain)
g212481
Advertisement
