GBC 5031TS ROLL Instruction Manual page 13

GBC 5031TS
LAMINATOR CONTROLS
Figure 19
Figure 20
Figure 21
© 2006 General Binding Corporation
A
B
C
A
B
C
A
B
C
D
OPERATION MANUAL
A. Emergency Stop Switch (Figure 19)
Press to engage, rotate in the direction of the
arrows to disengage.
B. Safety Shield
Located at the front of the machine – prevents
inadvertent contact with the top heat shoe.
C. Left and Right Safety Latches
(Figure 20)
A. Lateral Film Adjuster
B. Adjustment Knob
C. Locking Knob
A. Scrap Rewind Tube and Guides:
(Figure 21)
Rewinds the scrap film from the side slitting
operation.
B. Cooling Fans:
Cools the web before it exits the laminator.
C. Side Slitters
Push down to engage, pull up to disengage.
Can be adjusted while the laminator is running.
D. Emergency STOP Button
Press to engage. Twist in the direction of the
arrows to disengage.
(Contd.)
12