Repair And Maintenance - C-LOGIC 3900 Instruction Manual

6 REPAIR AND MAINTENANCE

1. If you suspect a faulty detector malfunction, please confirm that the battery
power is sufficient and the test lead is not broken.
2. Before returning the detector for repair, please disassemble the battery and
describe the malfunction, and then properly package the device to avoid
damage during shipping. Regarding the damages produced in the transport,
the company would assume the responsibility.
3. There is a fuse inside the emitter. If the fuse is damaged after the warranty
period, please replace it yourself with a fuse of the same model. This fuse is a
fast melt single wire type, so do not replace it with a helical wire type, or the
transmitting power and safety of the instrument will not be guaranteed.
6.1 Troubleshooting
If the detector does not work properly, please check the points in the attached
table:
Malfunction
I can't turn on the
appliance
Puntos a comprobar
Have you installed the
battery?
Is the battery power
too low?
Is the battery polarity
correct?
40
Cable locator
Measures to be applied
Install new batteries
Check polarity