Component Installation, Removal, Disassembly, Assembly And Adjustment; Removing And Re-Installing The Handrim - Decon wheel E-MOVE Service Manual

5. Component Installation, Removal, Disas-
sembly, Assembly and Adjustment
5.1 Removing and Re-installing the Handrim
n
Important
・ The same procedure is used for removing and re-installing both the left and right handrims. Accordingly, the
model description given below is for the right side. Use the same procedure for the left side.
Required tools: 4 mm and 1.5 mm hexagonal wrenches (Allen keys), flat-head screwdriver
5.1.1 Removing the Handrim
（a）
The figure shows the procedure
for a nickel-metal hydride battery.
(c)
1
2
(b)
Remove the battery (a).
R ele a s e t h e r ot atio n lo c k o n t h e
handle plate (b).
Raise the lever on the handle plate (b) and turn
the lock screw (c) two or three times to loosen
it.
Only loosen the screw; you do not need to re-
move it.
5
33