Events - rako WK-HUB Instruction Manual

- Step 1: Press the "Download Data" at the top of this page. This will open the data
for preview in the box below.
- Step 2: Press "Refresh List" if the data does not appear. If no Rooms appear or only
"default room" or "test bench" then there is no information to be downloaded from
the HUB.
- Step 3: Press "Import Data" to write the Room and Channel information into the
Project File.
- Step 4: Press "Refresh Channel Levels" to download the Scene data into the Project
File.

8 Events

Events can be viewed, added and edited using either Rasoft Pro, The Rako App or HUB
webpages. It should be noted that calendar event conditions can only be set from the HUB
web page interface.
The HUB can generate automated Events that trigger commands at specific times.
For example it is possible to automatically turn on the Garden lights on at Dusk and turn off
the Garden lights at Dawn.
WK-HUB
9
Manual Version 1.3.4