Setting Events Via The Hub Webpages - rako WK-HUB Instruction Manual

Output Action
The Output action section on the right hand side of the screen will define the command to
be sent when the conditions in "Event Trigger"/"Active Days" are met.
NB
The "Action" drop down menu is used to select the command sent when the event is triggered.
Typically these will be scene commands but it is possible to trigger and control Macros, Holiday
settings etc.

8.2 Setting Events via the HUB webpages

Events can be set via the "Activities" section of the HUB webpages. Navigate to this by
selecting "Activities" from the menu to the left hand side of the HUB web pages and then
selecting "Create Custom Activity".
A note on "Activities":
"Activities" refers generically to any HUB "Action" for example: Mappings (including Audio maps)
and Events.
This section is still in a beta state, it is advised that you limit the use of the section to:
- Mapping Sonos audio commands
- Creating Events
Mapping and events created in Rasoft Pro will appear here (as above) but will not be editable.
Please consult Rako technical support if you have any questions about "Activities"
Events can be created using the interface below, this interface works in a very similar way to
that found in Rasoft Pro and the App.
WK-HUB
11
Manual Version 1.3.4