Downloading The Project File - rako WK-HUB Instruction Manual

Type - This will change the appearance of the icon above the keypad on the App. It may
also affect the keypad that appears. For example a room set to "switch" will show two
buttons: "on" and "off" whereas a "blind" type room will show three buttons: "open",
"stop" and "close".
Mode - The mode of the room is only set when "lighting" is selected as the type. It will set
the variety of "keypad" that will appear in the App. Typically it is best to make this match
the physical keypad in the room.
NB
1) If a number of scenes that is not 4, 7 or 16 is desired then "named scenes" should be
selected. Give custom names to the scenes in the room editor and any number of scenes can
be made to appear on the App.
2) While the order of the rooms can be changed from this screen the order of the channels is
always fixed. To get channels in a specific order they must be addressed or mapped in the
desired order.
7 Downloading the project file
If information has been uploaded to the HUB then it is possible to import the Room,
Channel and Scene data into a blank project file.
The tab used for downloading information from the HUB is called "Room Import" select
this tab to open the page below.
WK-HUB
8
Manual Version 1.3.4