Table of Contents
Advertisement
3
3 Discovering the HUB and Setting the House Number
Before proceeding with any programming the HUB needs to be discovered
and the House number set. This is done via a web page setup wizard.
3.1 Discovering the HUB
Open Rasoft Pro programming software. Ensure that the laptop is connected
to the same network as the HUB.
The HUB should appear in the "Communication" window in the bottom
right of the software with a red stop sign. If it does not appear press
"Refresh". If it still does not appear refer to
section 3.4
of this manual.
3.2 Setting up the HUB using the Web Page Wizard
To access the HUB Web Pages right click the communication device in
the bottom right of the software. Select "Open in Browser"
WK-HUB
Manual Version 1.3.4
Advertisement
Table of Contents
