Cooking Grates; Recommended Cleaning Supplies; Outside Surfaces; Heat Tents - Dyna-Glo DGH450CRP Manual

Care and Maintenance

Cooking Grates

The best time to "burn-off" the cooking grates is after every use (approx. 15 minutes). The grill is already
hot from cooking, thus requiring less fuel to reach the necessary temperature for "burn-off."
To "burn off" or heat-clean your grill, turn the burners to highest position and run for 15 minutes with the
lid closed. Then turn off the burners and use a wire brush to clean excess food residue from the grates.
The porcelain grates have an enamel finish (similar to glass) and should be handled with care to help
prevent chipping.
ensure the grill is cool and gas supply is turned off at the LP-Gas Cylinder before cleaning
and conducting maintenance.

Recommended Cleaning Supplies

Mild liquid dish soap, warm water, nylon cleaning pad, wire brush
DO NOT use cleaners that contain acid, mineral spirits or any abrasive substance.

Outside surfaces

It is recommended to use only mild dish soap and hot water to clean grill and grill parts.
Rinse with warm water.
inside Bottom Pan of Grill Body
To avoid flare-ups, clean the bottom pan of the cooking box regularly.
To clean, remove residue using a brush, scraper and/or cleaning pad. Wash with mild dish soap and
warm water. Rinse with warm water. Avoid water splashing into venturi tubes of burners.

heat tents

Clean residue with wire brush and wash with mild dish soap
and warm water. Rinse with warm water.
Grease Cup
Empty the grease cup and clean with mild dish soap and warm
water on a regular basis.
Checking The Flame
For maximum fuel efficiency and cooking performance, flame
should be a blue-yellow color and be between 1- 2 inches high.
To check the flame, view the flame through the holes in both
sides of the firebox.
CAUTION
21
Hole for viewing the flame