Lennox LI009CI-160T432 Service Manual page 84

Service Manual
LI018CI-160T432 LI024CI-160T432
1.Remove fifter assy
Open the front panel. Push the left and
rightfilters to make them break away from
thegroove on the front case. Then remove
the leftand right filters one by one.
2.Remove horizontal louver
Push out the axile bush on horizontal louver,
Bend the horizontal louver with hand and
then separate the horizontal louver from the
crank shaft of step motor to remove it.
3.Remove panel and display
Separate the panel rotation shaft from
the groove fixing the front panel and then
removes the front panel.
Screw off the 2 screws that are locking the
display board.
Installation and Maintenance
Front panel
Left filter
Groove
Horizontal louver
Front panel
Panel rotation
Groove
Front
Right filter
case
Location of
step motor
Axile bush
Panel
Display
Screws
81