Table of Contents
Advertisement
WARNING
The system uses brake energy recuperation
to reduce the vehicle speed and does not
activate the vehicle brake.
·
Be ready to brake at all times if the de-
celeration is not sufficient.
WARNING
The system is not a substitute for the full
concentration of the driver.
·
Always adapt your speed and driving
style to the current visibility, weather
and road or traffic conditions.
·
Road signs on the road and traffic regu-
lations always have priority over driving
recommendations.
Time and date
Please refer to
at the start of the chap-
ter on page 18.
Setting the time and date on the Infotain-
ment system
1.
To access the
System settings
the
function button → page 31.
Settings
2.
Selection the menu option
3.
Select the time source:
— Automatic.
— Manual.
The time and date are displayed only on the
Infotainment system.
Button for driver assist sys-
tems
Please refer to
at the start of the chap-
ter on page 18.
You can open the
Assist systems
fotainment system using the button for driv-
er assist systems. The button for the driver
assist systems is located on the control panel
under the Infotainment system.
In the
vidual driver assist systems on and off and al-
so adjust individual settings → page 31.
1.
2.
3.
4.
Service menu
Please refer to
ter on page 18.
Opening the Service menu
1.
2.
menu, touch
3.
.
Time and date
4.
Resetting the trip recorder
1.
2.
Displaying vehicle identification number
(VIN)
— In the
menu in the In-
The vehicle identification number (VIN) is
displayed.
menu, you can switch indi-
assist systems
Press the
button.
Select 3D or optional list view.
Open the corresponding driver assist
system and make your desired setting.
The activated functions are highlighted
in colour.
To return to the previous menu, touch
the
sensor field or press the
ton.
at the start of the chap-
Touch the
function button in the
Vehicle
Infotainment system.
In the
menu, touch the
Vehicle
function button.
Select the
view.
Status
Open the desired menu and make the
desired setting. The activated functions
are highlighted in colour.
Touch the
button
HOME
the previous menu.
In the
view, select the
Status
menu.
Touch the
function button to reset
0.0
the value.
view, select the
Status
Instrument cluster
but-
Status
to return to
Trip recorder
menu.
Service
29
Advertisement
Table of Contents
