Westfalia 16 84 84 Instruction Manual page 12

2. Turn the workpiece holder (3) down until it touches the sheet material.
3. Pull the lever arm (1) forwards. The upper shear blade moves down and cuts
the sheet material. ATTENTION! Sheet material is very sharp. There is risk of
injuries.
Cutting Round Material
1. Insert the round workpiece through the round profile cutter (3).
2. Pull the lever arm (1) forwards. The upper shear blade moves down and cuts
the round workpiece.
Maintenance and Care

Keep the bench shear clean. Lubricate the joints from time to time with a few
drops of machine oil. Regularly check the firm fit of all parts.

Oil the bare pars after each use, especially oil the shear blades.

Worn or damaged shear blades must be replaced or sharpened by a qualified
workshop.

When not in use, store the unit in a dry place.
Technical Data
Shear Blade
Length
Sheet Material
Thickness
Round Bar
Flat Steel
Weight
Operation
16 84 84
125 mm
6 mm
6 mm
70 x 6 mm 70 x 6 mm
15 kg
16 84 92
150 mm
6 mm
6 mm
70 x 6 mm
17 kg
8
16 85 00 16 85 18
200 mm
6 mm
6 mm
70 x 6 mm
23 kg
300 mm
6 mm
6 mm
34 kg