Remove Sam Module; Remove Vibrator - Nokia 1265 Disassembly/Assembly

Nokia Customer Care
B. Stick a protect film to keep display surface from particles remained.

9. Remove SAM Module

Using the tweezers, gently unsnap SAM Module and pull up to remove it from
D-cover.
Note: Care must be taken not to touch, bend or damage the electrical contacts in
any way. If so, SAM Module must be replaced. The speaker is an integral part of
SAM Module to ensure optimum RF performance and must not be replaced
individually.

10. Remove Vibrator

Use the tweezers to grab the vibrator and pull upwards gently to remove it from
D-cover.
Issue 1 04/2007 © 2007 Nokia Corporation
Disassembly/Assembly
Company Confidential
1265(RH-103)
Page 9