1265 (RH-103)
Disassembly/Assembly
9. Assemble Receiver (Earpiece)
Stick the twins adhesives on the bottom of Receiver, then place it in the cavity of
A-cover. Be careful not to damage the spring contacts.
10. Keymat and A-cover Assembly
Assemble Keymat into A-cover by aligning to the tooling pins of A-cover and Key-
mat module tooling holes, then snap the snaps between A-cover and Keymat
module. Place the rubber tail into the microphone cavity .Be careful not to damage
the spring contacts.
11. Assemble A-Cover and Engine
Align and force to snap A-cover and Engine.
A. Top side snap force.
Page 14
© 2007 Nokia Corporation
Company Confidential
Issue 1 04/2007