dallmeier DLS 4 Operation Manual page 53

Fig. 8-11: Rectangle activated
q Intersection
Fig. 8-13: Intersection activated
Search Mode
The selection in the Search Mode field are theoretically used
to specify the search method and thus the number of relevant
events.
q Balance Point Search
Dallmeier electronic
If you have activated Intersection in the draw mode, only those
rectangles are displayed that are linked correspondingly with
the marking drawn by you, depending on the search method
(see Search mode).
If you have not activated Intersection, all the rectangles are
displayed.
The rectangles that mark a figure change have an imaginary
geometric balance point assigned.
DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
Fig. 8-12: Rectangle not activated
Fig. 8-14: Intersection not activated
53