Install Power Cord And Phone Line; Release The Scanner Lock - Brother Printer/Fax/Scanner/Copier MFC-8840 Quick Setup Manual

Install Power Cord and
5
Phone Line
Do not connect the Parallel or USB
cable yet.
1
Make sure that the power switch is off.
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
If
Check Scan Lock
immediately release the scanner lock and
press Stop/Exit.
3
Connect one end of the telephone line cord
to the socket on the MFC marked LINE and
the other end to a modular wall socket.
Warning
■ The MFC must be fitted with an earthed plug.
■ Since the MFC is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power to your MFC on
when you connect it to a telephone line. Similarly,
you can protect yourself when you want to move
your MFC by disconnecting the telephone line first
and then the power cord.
appears on the LCD,
If you are sharing one phone line with an
external telephone, connect it as shown
below.
(Example
for the U.K.)
If you are sharing one phone line with an
external telephone answering device,
connect it as shown below.
Please set the receive mode to External
TAD.
For more details, see "Connecting the
MFC" in Chapter 1 of the User's Guide.
(Example
for the U.K.)
Extension
Telephone
External
Telephone
TAD
TAD
5